Chlorine Free Eco-friendly PPS
ECOTRAN is world’s first to present Chlorine free, eco-friendly PPS. Ecotran PPS offers high purity, low out-gas, high flowability and easy handling.
ECOTRAN is manufactured by using Benzene and Sulfur without any chloride compounds. Unlike the conventional PPS, Ecotran is produced by eco-friendly manufacturing process that generates significantly less by-product.
Exceptional Thermal Stability
UL Temperature Index(RTI) : ~220ºC
HDT(Heat Deflection Temperature) : > 260ºC
Various Processability
Extrusion/Injection/Spin/Draw/ Calendering. It can be used various application such as compound/fiber/film etc
Superior Mechanical Properities
Retention of fatigue resistance and creep resistance with high strength and high stiffness in diverse condition.
Inherent Non-Flammability
UL94V-O/5VA without
The addition of a separate Flame retardant
Excellent Dimensional Stability
Due to minimal mold-shrinkage characteristics and low coefficient of linear expansion, superior dimensional stability is secured even in high-temperature, high-humidity conditions.
Excellent Chemical Resistance
As it cannot be melted by and solvent less than 200ºC It has a similar level of chemical resistance to PTE
Polymerization
Value
There are various grades in our
Ecotran PPS resins.
Grade Name | Description |
Compound | |
Ecotran E1000 Series | • Glass Fiber Reinforced |
Ecotran E5000 Series | • G/F + M/F Reinforced |
Ecotran SPA E2000 Series | •PPS/Elastomer Alloy |
Base Resin | |
Ecotran N060,G060,J060 | •Low viscosity for high filler |
Ecotran N200,G200,J200 | •Medium-range viscosity for |
Ecotran F237N | •Medium-range viscosity for |
Ecotran is similar to conventional PPS in mechanical, thermal and electrical properties.
Type G/F Contents | Unit | Cross Type 40% | Ecotran Semi-linear 40% | Linear Type 40% |
Specific gravity | - | 1.65 | 1.65 | 1.65 |
Mold shrinkage, FD/TD | % | 0.3/0.5 | 0.3/0.6 | 0.3/0.7 |
Tensile Strength | MPa | 175 | 185 | 195 |
Tensile Elongation | % | 1.2 | 1.3 | 1.7 |
Flexural Strength | MPa | 210 | 230 | 270 |
Flexural Modulus | GPa | 14 | 14 | 14 |
Impact Strength (Notch/Unnotched) | kJ/㎡ | 9/25 | 9/26 | 9/28 |
HDT at 1.82MPa | ℃ | >260 | >260 | 265~270 |
Dielectric strength | kv/mm | 20 | 28 | 28 |
Dielectric constant | 1MHz | 3.8 | 3.5 | 3.5 |
Volume resistance | Ohm.㎝ | 1xE16 | 1xE16 | 1xE16 |
Property | SKYTRA 5220F | Unit | E1040S | E1040SE | E1040SM | E5060G | E5060S | E5070G | E2130TM |
General Information | GF40% | GF40% | GF40% | GF/MF65% | GF/MF60% | GF/MF65% | GF30% | ||
Physical Properties | |||||||||
Density | ISO 1183/A | - | 1.67 | 1.67 | 1.67 | 1.96 | 1.96 | 1.96 | 1.49 |
Water Absorption | ISO 62 | % | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 | 0.02 |
Mold Shrinkage (MD/TD) | ISO 294-4 | % | 0.3 / 0.6 | 0.3 / 0.6 | 0.3 / 0.55 | 0.3 / 0.6 | 0.3 / 0.6 | 0.3 / 0.6 | 0.3 / 0.8 |
Mechanical Properties | |||||||||
Tensile Strength | ISO 527-1, -2 | Mpa | 185 | 192 | 183 | 130 | 150 | 145 | 155 |
Tensile elongation at break | ISO 527-1, -2 | % | 1.7 | 1.6 | 1.5 | 0.9 | 0.9 | 0.9 | |
Flexural Strength | ISO 178 | Mpa | 265 | 285 | 265 | 210 | 230 | 230 | 235 |
Flexural Modulus | ISO 178 | Mpa | 13,300 | 14 | 14,100 | 20,000 | 20,000 | 20,000 | 8,800 |
Charpy impact strength | ISO 179/1eU | KJ/m2 | 8.1 / 38 | 9 / 45 | 8.3 / 36 | 5.5 / 19 | 6 / 20 | 8 / 20 | 11.5 / 67 |
Rockwell Hardness | ISO 2039/2 | R-Scale | 120 | 121 | 121 | 121 | 121 | 121 | 121 |
Thermal Properties | |||||||||
Melting temperature | ISO 11357 | ℃ | 280 | 280 | 280 | 280 | 280 | 280 | 280 |
Heat Deflection temperature, | ISO 75-1, -2/A | ℃ | 265 | >265 | 265 | 265 | 265 | 265 | 265 |
Flammability (T=3.2mm) | UL 94 | class | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 |
Electrical Properties | |||||||||
Dielectric strength (T=1.0mm | IEC 60243-1 | kv/mm | 28 | 28 | 28 | 25 | 25 | 25 | 25 |
Dielectric constant, 1MHz | IEC 60250 | - | 3.8 | 3.8 | 3.8 | 4.8 | 4.6 | 4.8 | 4.8 |
Dielectric factor, 1MHz | IEC 60250 | - | 0.0016 | 0.0016 | 0.0016 | 0.0016 | 0.0016 | 0.0016 | 0.005 |
Comparative tracking index | IEC 60112 | Volt | 150 | 175 | 175 | 225 | 225 | 225 | 150 |
Arc resistance | ASTM D495 | sec. | 125 | 125 | 125 | 180 | 180 | 180 | 120 |
Volume resistivity | IEC 60093 | Ohm.cm | 1016 | 1016 | 1016 | 1016 | 1016 | 1016 | 1016 |
Grade | Characteristic | Competitive Garde | Remark | ||||
Initz | Solvay(CPC) | Ticona | DIC | Toray | |||
GF 40% | High Flow, Low Flash | E1040G | R-4-230 | 1140L7 | FZ-1140B2 | A504FG1 | Low out-gas |
High Strength | E1040S | R-4-200 | 1140L6 | FZ-1140D5 | A504X90 | FDA, NSF Approvals | |
Hydraulic Stability | E1040HR | R-4-220 | FZ-1140R5 | FDA, NSF Approvals | |||
Low Friction | BR42 | 1342L4 | FZL-4033 | A604X95 | PTFE 10% | ||
GF/MF 50% | High Strength | E5050S | 6850L6 | A490 | Tosoh P-30 | ||
GF/MF 60-65% | General purpose | E5060G | R-7 | 6165A4 | FZ-3600 | A310MX04 | |
Dimensional Stability | E5060G | R-7-120 | 4665B6 | FZ-3600L4 | A310MB | Low out-gas | |
High Strength | E5060S | BR111 | 6160B4 | FZ-3600D5 | A400MX05 | Low Creep, High Flow | |
Hydraulic Stability | R-7-220 | FZ-3600R5 | A410MV07 | Low out-gas | |||
GF/MF 70% | General purpose | E5070G | A310MB7 | ||||
Alloy | PSU Alloy | FZ-820(FZ-928N) | Forignition coapplication | ||||
PPE Alloy | 3805A1 | A390M65BD | OPU Application | ||||
Elastomer alloy Unfilled | E2000T | XE-3200 | Z-200E5 | High Flow | |||
Elastomer alloy GF30% | E2130T | XE-5030 | Z-230 | A673M | High Flow, Drinking Water | ||
Elastomer alloy GF505 | E2150T | 6160T6 | Z-650 | A575W20 | High Flow, Drinking Water | ||
Phone Number
Email Address
Office Address
